`new_*()`

Package ‘pdqr’ supports two types of distributions:

**Type “discrete”**: random variable has finite number of output values. It is explicitly defined by the collection of its values with their corresponding probability.**Type “continuous”**: there are infinite number of output values in the form of continuous random variable. It is explicitly defined by piecewise-linear density function.

**Note** that all distributions assume **finite
support** (output values are bounded from below and above) and
**finite values of density function** (density function in
case of “continuous” type can’t go to infinity).

All `new_*()`

functions create a pdqr-function of certain
type (“discrete” or “continuous”) based on sample or data frame of
appropriate structure:

**Sample input**is processed based on type. For “discrete” type it gets tabulated with frequency of unique values serving as their probability. For “continuous” type distribution density is estimated using`density()`

function if input has at least 2 elements. For 1 element special “dirac-like” pdqr-function is created: an*approximation single number*with triangular distribution of very narrow support (1e-8 of magnitude). Basically, sample input is converted into data frame of appropriate structure that defines distribution (see next list item).**Data frame input**should completely define distribution. For “discrete” type it should have “x” and “prob” columns for output values and their probabilities. For “continuous” type - “x” and “y” columns for points, which define piecewise-linear continuous density function. Columns “prob” and “y” will be automatically normalized to represent proper distribution: sum of “prob” will be 1 and total square under graph of piecewise-linear function will be 1.

We will use the following data frame inputs in examples:

```
# For type "discrete"
dis_df <- data.frame(x = 1:4, prob = 4:1 / 10)
# For type "continuous"
con_df <- data.frame(x = 1:4, y = c(0, 1, 1, 1))
```

This vignette is organized as follows:

- Four sections about how to create p-, d-, q-, and r-functions (both from sample and data frame).
- Section “Special cases”, which describes two special cases of pdqr-functions: dirac-like and boolean.
- Section “Using
`density()`

arguments” describes how to use`density()`

arguments to tweak smoothing during creation of “continuous” pdqr-functions. - “Metadata of pdqr-functions” describes the concept of metadata of pdqr-functions.

P-function (analogue of `p*()`

functions in base R)
represents a cumulative distribution function of distribution.

```
# Treating input as discrete
p_mpg_dis <- new_p(mtcars$mpg, type = "discrete")
p_mpg_dis
#> Cumulative distribution function of discrete type
#> Support: [10.4, 33.9] (25 elements)
# Treating input as continuous
p_mpg_con <- new_p(mtcars$mpg, type = "continuous")
p_mpg_con
#> Cumulative distribution function of continuous type
#> Support: ~[2.96996, 41.33004] (511 intervals)
# Outputs are actually vectorized functions
p_mpg_dis(15:20)
#> [1] 0.18750 0.31250 0.34375 0.40625 0.46875 0.56250
p_mpg_con(15:20)
#> [1] 0.2185498 0.2804962 0.3465967 0.4143147 0.4818869 0.5478942
# You can plot them directly using base `plot()` and `lines()`
plot(p_mpg_con, main = "P-functions from sample")
lines(p_mpg_dis, col = "blue")
```

```
p_df_dis <- new_p(dis_df, type = "discrete")
p_df_dis
#> Cumulative distribution function of discrete type
#> Support: [1, 4] (4 elements)
p_df_con <- new_p(con_df, type = "continuous")
p_df_con
#> Cumulative distribution function of continuous type
#> Support: [1, 4] (3 intervals)
plot(p_df_con, main = "P-functions from data frame")
lines(p_df_dis, col = "blue")
```

D-function (analogue of `d*()`

functions in base R)
represents a probability mass function for “discrete” type and density
function for “continuous”:

```
# Treating input as discrete
d_mpg_dis <- new_d(mtcars$mpg, type = "discrete")
d_mpg_dis
#> Probability mass function of discrete type
#> Support: [10.4, 33.9] (25 elements)
# Treating input as continuous
d_mpg_con <- new_d(mtcars$mpg, type = "continuous")
d_mpg_con
#> Density function of continuous type
#> Support: ~[2.96996, 41.33004] (511 intervals)
# Outputs are actually vectorized functions
d_mpg_dis(15:20)
#> [1] 0.03125 0.00000 0.00000 0.00000 0.00000 0.00000
d_mpg_con(15:20)
#> [1] 0.05888171 0.06450605 0.06726441 0.06788664 0.06703401 0.06469730
# You can plot them directly using base `plot()` and `lines()`
op <- par(mfrow = c(1, 2))
plot(d_mpg_con, main = '"continuous" d-function\nfrom sample')
plot(d_mpg_dis, main = '"discrete" d-function\nfrom sample', col = "blue")
```

```
d_df_dis <- new_d(dis_df, type = "discrete")
d_df_dis
#> Probability mass function of discrete type
#> Support: [1, 4] (4 elements)
d_df_con <- new_d(con_df, type = "continuous")
d_df_con
#> Density function of continuous type
#> Support: [1, 4] (3 intervals)
op <- par(mfrow = c(1, 2))
plot(d_df_con, main = '"continuous" d-function\nfrom data frame')
plot(d_df_dis, main = '"discrete" d-function\nfrom data frame', col = "blue")
```

Q-function (analogue of `q*()`

functions in base R)
represents a quantile function, an inverse of corresponding
p-function:

```
# Treating input as discrete
q_mpg_dis <- new_q(mtcars$mpg, type = "discrete")
q_mpg_dis
#> Quantile function of discrete type
#> Support: [10.4, 33.9] (25 elements)
# Treating input as continuous
q_mpg_con <- new_q(mtcars$mpg, type = "continuous")
q_mpg_con
#> Quantile function of continuous type
#> Support: ~[2.96996, 41.33004] (511 intervals)
# Outputs are actually vectorized functions
q_mpg_dis(c(0.1, 0.3, 0.7, 1.5))
#> [1] 14.3 15.8 21.5 NaN
q_mpg_con(c(0.1, 0.3, 0.7, 1.5))
#> [1] 12.53278 16.29969 22.62140 NaN
# You can plot them directly using base `plot()` and `lines()`
plot(q_mpg_con, main = "Q-functions from sample")
lines(q_mpg_dis, col = "blue")
```

```
q_df_dis <- new_q(dis_df, type = "discrete")
q_df_dis
#> Quantile function of discrete type
#> Support: [1, 4] (4 elements)
q_df_con <- new_q(con_df, type = "continuous")
q_df_con
#> Quantile function of continuous type
#> Support: [1, 4] (3 intervals)
plot(q_df_con, main = "Q-functions from data frame")
lines(q_df_dis, col = "blue")
```

R-function (analogue of `r*()`

functions in base R)
represents a random generation function. For “discrete” type it will
generate only values present in input. For “continuous” function it will
generate values from distribution corresponding to one estimated with
`density()`

.

```
# Treating input as discrete
r_mpg_dis <- new_r(mtcars$mpg, type = "discrete")
r_mpg_dis
#> Random generation function of discrete type
#> Support: [10.4, 33.9] (25 elements)
# Treating input as continuous
r_mpg_con <- new_r(mtcars$mpg, type = "continuous")
r_mpg_con
#> Random generation function of continuous type
#> Support: ~[2.96996, 41.33004] (511 intervals)
# Outputs are actually functions
r_mpg_dis(5)
#> [1] 17.3 10.4 21.5 21.4 15.2
r_mpg_con(5)
#> [1] 16.30053 20.58094 16.80433 21.19017 19.96810
# You can plot them directly using base `plot()` and `lines()`
op <- par(mfrow = c(1, 2))
plot(r_mpg_con, main = '"continuous" r-function\nfrom sample')
plot(r_mpg_dis, main = '"discrete" r-function\nfrom sample', col = "blue")
```

```
r_df_dis <- new_r(dis_df, type = "discrete")
r_df_dis
#> Random generation function of discrete type
#> Support: [1, 4] (4 elements)
r_df_con <- new_r(con_df, type = "continuous")
r_df_con
#> Random generation function of continuous type
#> Support: [1, 4] (3 intervals)
op <- par(mfrow = c(1, 2))
plot(r_df_con, main = '"continuous" r-function\nfrom data frame')
plot(r_df_dis, main = '"discrete" r-function\nfrom data frame', col = "blue")
```

When creating “continuous” pdqr-function with `new_*()`

from single number, a special “dirac-like” pdqr-function is created. It
is an *approximation of single number* with triangular
distribution of very narrow support (1e-8 of magnitude):

```
r_dirac <- new_r(3.14, type = "continuous")
r_dirac
#> Random generation function of continuous type
#> Support: ~[3.14, 3.14] (2 intervals)
r_dirac(4)
#> [1] 3.14 3.14 3.14 3.14
# Outputs aren't exactly but approximately equal
dput(r_dirac(4))
#> c(3.13999999621714, 3.14000000258556, 3.13999999778332, 3.13999999147402
#> )
```

Boolean pdqr-function is a special case of “discrete” function, which values are exactly 0 and 1. Those functions are usually created after transformations involving logical operators (see vignette on transformation for more details). It is assumed that 0 represents that some expression is false, and 1 is for being true. Corresponding probabilities describe distribution of expression’s logical values. The only difference from other “discrete” pdqr-functions is in more detailed printing.

`density()`

argumentsWhen creating pdqr-function of “continuous” type,
`density()`

is used to estimate density. To tweak its
performance, supply its extra arguments directly to `new_*()`

functions. Here are some examples:

```
plot(
new_d(mtcars$mpg, "continuous"), lwd = 3,
main = "Examples of `density()` options"
)
# Argument `adjust` of `density()` helps to define smoothing bandwidth
lines(new_d(mtcars$mpg, "continuous", adj = 0.3), col = "blue")
# Argument `n` defines number of points to be used in piecewise-linear
# approximation
lines(new_d(mtcars$mpg, "continuous", n = 5), col = "green")
# Argument `cut` defines the "extending" property of density estimation.
# Using `cut = 0` assumes that density can't go outside of input's range
lines(new_d(mtcars$mpg, "continuous", cut = 0), col = "magenta")
```

Every pdqr-function has metadata, information which describes
underline distribution and pdqr-function. Family of
`meta_*()`

functions are implemented to extract that
information:

**“x_tbl” metadata**(returned by`meta_x_tbl()`

) completely defines distribution. It is a data frame with structure depending on type of pdqr-function:- For “discrete” type it has columns “x” (output values), “prob” (their probability), and “cumprob” (their cumulative probability).
- For “continuous” type it has columns “x” (knots of piecewise-linear density), “y” (density values at those points), “cumprob” (their cumulative probability).

**Pdqr class**(returned by`meta_class()`

) - class of pdqr-function. This can be one of “p”, “d”, “q”, “r”. Represents how pdqr-function describes underlying distribution.**Pdqr type**(returned by`meta_type()`

) - type of pdqr-function. This can be one of “discrete” or “continuous”. Represents type of underlying distribution.**Pdqr support**(returned by`meta_support()`

) - support of distribution. This is a range of “x” column from “x_tbl” metadata.

```
# Type "discrete"
d_dis <- new_d(1:4, type = "discrete")
meta_x_tbl(d_dis)
#> x prob cumprob
#> 1 1 0.25 0.25
#> 2 2 0.25 0.50
#> 3 3 0.25 0.75
#> 4 4 0.25 1.00
meta_class(d_dis)
#> [1] "d"
meta_type(d_dis)
#> [1] "discrete"
meta_support(d_dis)
#> [1] 1 4
# Type "continuous"
p_con <- new_p(1:4, type = "continuous")
head(meta_x_tbl(p_con))
#> x y cumprob
#> 1 -1.290542 0.001477707 0.000000e+00
#> 2 -1.275706 0.001568091 2.259340e-05
#> 3 -1.260870 0.001660241 4.654081e-05
#> 4 -1.246034 0.001759392 7.190728e-05
#> 5 -1.231199 0.001862292 9.877253e-05
#> 6 -1.216363 0.001970915 1.272068e-04
meta_class(p_con)
#> [1] "p"
meta_type(p_con)
#> [1] "continuous"
meta_support(p_con)
#> [1] -1.290542 6.290542
# Dirac-like "continuous" function
r_dirac <- new_r(1, type = "continuous")
dput(meta_x_tbl(r_dirac))
#> structure(list(x = c(0.99999999, 1, 1.00000001), y = c(0, 100000000.052636,
#> 0), cumprob = c(0, 0.5, 1)), row.names = c(NA, -3L), class = "data.frame")
dput(meta_support(r_dirac))
#> c(0.99999999, 1.00000001)
# `meta_all()` returns all metadata in a single list
meta_all(d_dis)
#> $class
#> [1] "d"
#>
#> $type
#> [1] "discrete"
#>
#> $support
#> [1] 1 4
#>
#> $x_tbl
#> x prob cumprob
#> 1 1 0.25 0.25
#> 2 2 0.25 0.50
#> 3 3 0.25 0.75
#> 4 4 0.25 1.00
```

For more details go to help page of `meta_all()`

.